Product Description
The RH Ring Head - RH19DX17
Tohnichi's interchangeable head wrenches have specific diameter round ends that fit into corresponding head base openings. Head and wrench model names include the diameter sizes so that heads can be matched to wrenches that accept those heads. With the large selection of head styles available, wrenches such as CL (for tightening) and CEM3 (for measuring) can use the same head that has the same root diameter--making interchangeable head wrenches an economical and flexible tool choice.
Features:
| Model | Allowable Torque | Outside Width | Thick- ness | Length | Applicable Models |
| (Head Size X Width) | [N.m] | [mm] | [mm] | [mm] | |
| RH19D X 17 | 100 | 27 | 10 | 80 | CL200N/CSP/PCL YCL180N CDB200N-S, CF150N CEM180N2 CTA200/CTA-P/CTB |
Note:
- The RH type ring head replacement guarantees the safe work as the axes of bolt and RH ring head are always aligned and prevent the heads will drop.
Made In Japan
Warranty
All Tohnichi products are thoroughly checked and tested at the factory before shipment. The accuracy of each tool should be as stated for each model as a percentage of reading unless otherwise noted. Hand tool durability is based on repeated movement tests over a minimum of 100, 000 cycles by a durability testing machine. Should defects due to faulty materials and workmanship develop within one (1) year from the date of sale, it will be repaired and put in workable condition or replaced free of charge if returned to Tohnichi with proof of purchase. The warranty is not valid if the product has been misused, tampered with, or abused.Product Videos
Custom Field
Scale Metric
Type Ring
