Product Description
The 13055 Norbar 1/2" Dr TW Model 200 Preset Type 'Industrial' Ratchet Torque Wrench 30 - 150 Ft Lbs / 40 - 200 Nm.
P' Type Torque Wrenches are designed for the production environment where they will be set and then dedicated to a particular application. There is no scale, the wrench must be set against a torque testing device such as Norbar's Professional Torque Tester. The push-through ratchets on these models are robustly engineered for strength and durability. The strength and high wear resistance comes from a coarse tooth pattern while a principle of offset ratchet pawls gives a narrow engagement angle. The push-through square drive is not only a robust design but allows the wrench to be used for torque control in both the clockwise and anti clockwise directions, and allows for a wider model range of up to 400 N·m.
Norbar 13055 Preset Torque Wrench Features:
- Setting system is designed to discourage unauthorized alteration.
- Colored end seals are provided to identify the wrench to a particular operator, torque setting or calibration period.
- Accuracy of +/-3% of reading exceeds all international standards for torque wrenches.
- Every wrench comes supplied with a calibration certificate.
- Available with a high quality ratchet or as a 'Torque Handle'.
- Supplied in a molded box for storage and protection.
- Retained square drive will not pull out of the head when the socket is removed
- Length: 16.6"
- Square Size: 1/2"
- Weight: 2.1 Lbs
- Ratchet Teeth: 72
- Accuracy: +/-3%
- Operates between:
- 30.0 - 150.0 lbf·ft
- 40.0 - 200.0 N·m
- Ratchet Type: Industrial Push-Through
- Ratchet Diameter: 42 mm
Made In England
Warranty
NORBAR Products Warranty: 7.1 The Company warrants that, subject to the other provisions of these Conditions upon delivery, and for a period of 12 months after the date of delivery, the Goods will: a) be of satisfactory quality within the meaning of the Sale of Goods Act 1979; and b) comply in all material respects with the specification for them as set out in the CompanyÂ’s catalogue or other published specification current at the time that the order for the Goods was accepted by the Company. 7.2 The Company will not be liable for a breach of any of the warranties in condition 7.1 unless: a) the Buyer gives written notice of the defect to the Company within 14 days of the time when the Buyer discovers or ought to have discovered the defect; and b) the Buyer returns the defective Goods properly packed, carriage paid to the CompanyÂ’s premises at the address given in condition 1.1. 7.3 The Company will not be liable for a breach of the warranties in condition 7.1 if: a) the Buyer makes any further use of the Goods after giving such notice; or b) the Goods have been misused, mishandled, overloaded, amended, modified or repaired in any way by the Buyer or its customers, or used for any purpose other than that for which they were designed; or c) the defect is due to fair wear and tear or arises because the Buyer or its customer failed to follow the CompanyÂ’s oral or written instructions as to the storage, installation, commissioning, use or maintenance of the Goods or (if there are none) good trade practice. 7.4 Subject to conditions 7.2 and 7.3, if any of the Goods do not conform with any of the warranties in condition 7.1, the Company will at its option repair or replace such Goods (or the defective part of them) or refund the price of such Goods at the pro rata Contract rate. 7.5 If the Company complies with condition 7.4, it will have no further liability for a breach of any of the warranties in clause 7.1 in respect of such Goods. 7.6 Except as provided in condition 7.1, the Company makes no representation or warranty, whether express or implied, as to the quality or fitness for purpose of the Goods and all warranties, conditions and other terms which may be implied by statute or common law are, to the fullest extent permitted by law, excluded from the Contract. 7.7 Nothing in this Contract excludes or limits the liability of the Company for: a) death or personal injury caused by the CompanyÂ’s negligence; or b) under section 2(3) of the Consumer Protection Act 1987; or c) for fraud or fraudulent misrepresentation; or d) for any matter which it would be illegal for the Company to exclude or attempt to exclude its liability.Product Videos
Custom Field
Drive Size 1/2 Inch
Max Ft Lbs 150
Max Nm 200
Length 16.6"
Weight 2.1 Lbs
Type Click
Accuracy 3%
